Clear Pagp - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

clear pagp

clear pagp
Use the clear pagp privileged EXEC command to clear Port Aggregation Protocol (PAgP)
channel-group information.
Syntax Description
channel-group-number
counters
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEF
Usage Guidelines You can clear all counters by using the clear pagp counters command, or you can clear only the counters
for the specified channel group by using the clear pagp channel-group-number counters command.
Examples This example shows how to clear all channel-group information:
Switch# clear pagp counters
This example shows how to clear PAgP traffic counters for group 10:
Switch# clear pagp 10 counters
You can verify that information was deleted by entering the show pagp privileged EXEC command.
Related Commands Command
show pagp
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-42
clear pagp {channel-group-number counters | counters}
(Optional) Channel group number. The range is 1 to 48.
Clear traffic counters.
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Description
Displays PAgP channel-group information.
OL-8916-01