Debug Spanning-Tree Backbonefast - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
debug spanning-tree backbonefast
debug spanning-tree backbonefast
Use the debug spanning-tree backbonefast privileged EXEC command to enable debugging of
spanning-tree BackboneFast events. Use the no form of this command to disable debugging.
Syntax Description
detail
exceptions
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SEF
Usage Guidelines
The undebug spanning-tree backbonefast command is the same as the no debug spanning-tree
backbonefast command.
Related Commands
Command
show debugging
show spanning-tree
Cisco Catalyst Blade Switch 3020 for HP Command Reference
B-62
debug spanning-tree backbonefast [detail | exceptions]
no debug spanning-tree backbonefast [detail | exceptions]
(Optional) Display detailed BackboneFast debug messages.
(Optional) Display spanning-tree BackboneFast-exception debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Displays spanning-tree state information.
Appendix B
Cisco Catalyst Blade Switch 3020 for HP Debug Commands
OL-8916-01
Advertisement
Table of Contents
