Boot Helper-Config-File - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

boot helper-config-file

boot helper-config-file
Use the boot helper-config-file global configuration command to specify the name of the configuration
file to be used by the Cisco IOS helper image. If this is not set, the file specified by the CONFIG_FILE
environment variable is used by all versions of Cisco IOS that are loaded. Use the no form of this
command to return to the default setting.
Syntax Description filesystem:
/file-url
Defaults No helper configuration file is specified.
Command Modes
Global configuration
Command History Release
12.2(25)SEF
Usage Guidelines This variable is used only for internal development and testing.
Filenames and directory names are case sensitive.
This command changes the setting of the HELPER_CONFIG_FILE environment variable. For more
information, see
Related Commands Command
show boot
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-24
boot helper-config-file filesystem:/file-url
no boot helper-config file
Modification
This command was introduced.
Appendix A, "Cisco Catalyst Switch 3020 for HP Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Alias for a flash file system. Use flash: for the system board flash
device.
The path (directory) and helper configuration file to load.
OL-8916-01