Cisco 3020 - Catalyst Blade Switch Command Reference Manual page 575

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
VLAN ISL Id: 1002
<output truncated>
This is an example of output from the show changes command:
Switch(vlan)# show changes
DELETED:
VLAN ISL Id: 4
MODIFIED:
VLAN ISL Id: 7
This example shows how to display the differences between VLAN 7 in the current database and the
proposed database.
Switch(vlan)# show changes 7
MODIFIED:
VLAN ISL Id: 7
This is an example of output from the show current 20 command. It displays only VLAN 20 of the
current database.
Switch(vlan)# show current 20
VLAN ISL Id: 20
Related Commands Command
show vlan
shutdown vlan
vlan (global
configuration)
OL-8916-01
Name: fddi-default
Media Type: FDDI
VLAN 802.10 Id: 101002
State: Operational
MTU: 1500
Bridge Type: SRB
Ring Number: 0
Translational Bridged VLAN: 1
Translational Bridged VLAN: 1003
Name: VLAN0004
Media Type: Ethernet
VLAN 802.10 Id: 100004
State: Operational
MTU: 1500
Current State: Operational
Modified State: Suspended
Current State: Operational
Modified State: Suspended
Name: VLAN0020
Media Type: Ethernet
VLAN 802.10 Id: 100020
State: Operational
MTU: 1500
Description
Displays the parameters for all configured VLANs in the administrative
domain.
Shuts down (suspends) local traffic on the specified VLAN.
Enters config-vlan mode for configuring normal-range and extended-range
VLANs.
Cisco Catalyst Blade Switch for HP Command Reference
vlan database
2-547