Debug Backup - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

debug backup

debug backup
Use the debug backup privileged EXEC command to enable debugging of the Flex Links backup
interface. Use the no form of this command to disable debugging.
Syntax Description all
errors
events
Command Default Backup interface debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEF
Usage Guidelines
The undebug backup command is the same as the no debug backup command.
Related Commands Command
show debugging
Cisco Catalyst Blade Switch 3020 for HP Command Reference
B-4
debug backup {all | errors | events}
no debug backup {all | errors | events}
Display all backup interface debug messages.
Display backup interface error or exception debug messages.
Display backup interface event debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration
Guides and Command References > Cisco IOS Configuration
Fundamentals Configuration Guide, Release 12.2 > System
Management > Troubleshooting and Fault Management.
Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands
OL-8916-01