Dot1X Re-Authenticate - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
dot1x re-authenticate
Use the dot1x re-authenticate privileged EXEC command to manually initiate a re-authentication of
the specified IEEE 802.1x-enabled port.
Syntax Description
interface interface-id
Defaults
There is no default setting.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SEF
Usage Guidelines
You can use this command to re-authenticate a client without waiting for the configured number of
seconds between re-authentication attempts (re-authperiod) and automatic re-authentication.
Examples
This example shows how to manually re-authenticate the device connected to a port:
Switch# dot1x re-authenticate interface gigabitethernet0/21
Related Commands
Command
dot1x reauthentication
dot1x timeout
OL-8916-01
dot1x re-authenticate [interface interface-id]
(Optional) Module and port number of the interface to re-authenticate.
Modification
This command was introduced.
reauth-period
Description
Enables periodic re-authentication of the client.
Sets the number of seconds between re-authentication
attempts.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
dot1x re-authenticate
2-79
Advertisement
Table of Contents
