Debug Spanning-Tree Uplinkfast - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
Appendix B
Cisco Catalyst Blade Switch 3020 for HP Debug Commands
debug spanning-tree uplinkfast
Use the debug spanning-tree uplinkfast privileged EXEC command to enable debugging of
spanning-tree UplinkFast events. Use the no form of this command to disable debugging.
Syntax Description
exceptions
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SEF
Usage Guidelines
The undebug spanning-tree uplinkfast command is the same as the no debug spanning-tree
uplinkfast command.
Related Commands
Command
show debugging
show spanning-tree
OL-8916-01
debug spanning-tree uplinkfast [exceptions]
no debug spanning-tree uplinkfast [exceptions]
(Optional) Display spanning-tree UplinkFast-exception debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Displays spanning-tree state information.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
debug spanning-tree uplinkfast
B-69
Advertisement
Table of Contents
