Network Setting - Ricoh Aficio SP 3500N Hardware Manual

1. Press the [Menu] key.
2. Press the [ ] or [ ] key to display [Host Interface], and then press the [OK] key.
Menu:
Host Interface
3. Press the [ ] or [ ] key to display [Network Setting], and then press the [OK] key.
Host Interface:

Network Setting

4. Press the [ ] or [ ] key to display [IPv4 Config.], and then press the [OK] key.
Network Setting:
IPv4 Config.
When [IPv4 Config.] setting is changed, Alert indicator lights up indicating that the machine needs
to be restarted. Although the printer can be used normally, the light will not turn off until you restart
the machine.
5. Press the [ ] or [ ] key to display [DHCP], and then press the [OK] key.
IPv4 Config.:
DHCP
6. Press the [ ] or [ ] key to select [Inactive], and then press the [OK] key.
DHCP:
Inactive
7. Press the [ ] or [ ] key to display [IP Address], and then press the [OK] key.
IPv4 Config.:
IP Address
8. Press the [ ] or [ ] key to enter the address, and then press the [OK] key.
IP Address:
XXXX.XXXX.XXXX.XXXX
CMC034
Ethernet Configuration
45