REAR WHEEL/BRAKE/SUSPENSION
REAR WHEEL
REMOVAL
● Support the motor cycle on the main stand.
● Loosen the rear brake adjuster, and remove the brake
cable.
● Remove the brake arm joint B.
BRAKE ARM JOINT B
ADJUST NUT
● Remove the muffler. ( 3-7 )
U NUT
● Remove the rear wheel mud guard.
● Loosen the rear wheel U nut.
● Remove the washer.
● Remove the rear wheel.
REAR WHEEL
INSPECTION
● Turn the wheel, and check the rim for wobbles.
SERVICE LIMIT : Radical 2.0mm
Axial 2.0mm
DIAL GUAGE
INSTALLATION
● Insert the rear wheel over the final shaft.
FINAL SHAFT
11-3