FRONT WHEEL/FRONT FORK/STEERING
● Install the top cone race and the steering head top
thread nut on the steering head.
● Tighten the top thread nut completely, and loosen by
1/8 turn.
TORQUE VALUE :
1.0㎏f·m
● Check the top and bottom free play, and check for
smooth left and right movement.
● Temporarily install the R/L front forks first, and tighten
the steering stem nuts.
TORQUE VALUE : 7.0kgf·m
TOOLS : LOCK NUT WRENCH
EXTENSION BAR
● Install the front fork.
● Install the following parts.
- Steering handle ( 10-3)
- Front wheel ( 10-5 )
- Front handle cover/ rear handle cover ( 3-6 )
- Front fender ( 3-5 )
- Front brake caliper ( 12-7 )
NOTE
·Check the cables and wiring for interference.
● Install the front cover.
10-22