EXTERNAL PARTS
TAILLIGHT BASE
● Remove the luggage box. ( 3-3)
● Remove the center cover. ( 3-3)
● Remove the rear carrier. ( 3-3)
● Remove the body cover. ( 3-3)
● Loosen 2 washer bolt securing the frame.
● Loosen 2 body cover clip securing the rear fender.
● Disconnect the taillight wiring.
● Remove the taillight base.
● Install in the reverse order of removal.
FLOOR SIDE COVER
● Loosen the 2 washer screw located in the side of the
R,L floor side cover.
● Loosen the tapping screw (R/L) securing the lower and
rear end of the floor panel.
● Pull the front part of the floor side cover to remove the
floor panel.
● Remove the floor side cover.
● Install in the reverse order of removal.
FLOOR PANEL
● Remove the plug maintenance cover. (
● Remove the center cover. ( 3-3)
● Loosen the tapping screw securing the battery cover to
remove the battery cover.
● Disconnect the battery wiring to remove the battery.
● Remove the floor side cover.
● Remove the floor panel cap A and B.
● Loosen the 4 washer bolts securing the floor panel.
● Remove the floor panel from the connecting groove of
the inner box by lifting the rear part of the panel
slightly.
● Draw the floor panel moving it to the right and left to
remove it.
● Install in the reverse order of removal.
3-4
3-3 )
WASHER BOLT
WASHER SCREW
FLOOR PANEL CAP
WASHER BOLT
TAILLIGHT WIRING
BODY COVER CLIP