Settings You Can Change With User Tools; Auto Tray Switching; Original Type Setting; Duplex Mode Priority - Ricoh Printer/Fax/Scanner/Copier Aficio 1515 Operating Instructions Manual

Settings You Can Change with User Tools

Auto Tray Switching

If you load paper of the same size and
in the same orientation in two trays,
the machine automatically shifts to
the other tray when the first tray runs
out of paper. This function is called
"Auto Tray Switching". This setting
specifies whether to use Auto Tray
Switching or not.
Note
❒ Default: On
❒ Off: When a paper tray runs out of
paper, copying is interrupted and
the "
Load paper
pears.
❒ To enable this function, the APS
settings of Paper Type: Tray 1 and
2 have to be selected [On]. See
"Tray Paper Settings", General Set-
tings Guide.

Original Type Setting

You can adjust copy finish quality
level according to original type. You
can choose these functions after se-
lecting [Original Type 1 (Text)]or [Origi-
nal Type 2 (Photo)].
• Text Mode 1
normal text originals
• Text Mode 2
newspapers, semi-transparent
originals (reverse side print faintly
visible)
• Photo Mode 1
text/photo images containing
mostly photo areas
• Photo Mode 2
text/photo images containing
mostly text areas
" message ap-
Settings You Can Change with User Tools
• Photo Mode 3
actual photographic paper
• Special Mode 1
Highly transparent originals (re-
verse side clearly visible), or light
text on a coloured background.
Also for originals with very grainy
backgrounds (some newspapers)
and light text.
• Special Mode 2
originals with coloured text and
lines
• Special Mode 3
photo images created by dithering
(visible dots), such as newspaper
photos - normal resolution
• Special Mode 4
photo images created by dithering
(visible dots), such as newspaper
photos - coarse resolution
• Special Mode 5
normal text originals (reproducing
the background)
Note
❒ Default:
• Original Type 1 (Text): Text Mode
1
• Original Type 2 (Photo): Photo
Mode 1

Duplex Mode Priority

You can select the type of Duplex
function effective when the machine
is turned on, reset, or modes are
cleared.
Note
❒ Default: 1 Sided → 1 Sided
4
43