Chapter 2 How to Load Documents
Fig. 1
35
Reference point
Front side
Feed
direction
The above condition applies when the document is set to
the center of the pick roller width.
When you use detection by overlapping, scanning thick
documents such as plastic cards will be falsely detected as
multifeed. In that case, disable multifeed detection.
Top
Bottom
Center
( Unit : mm)
Accuracy of multifeed detection may drop with some
documents.
Multifeed cannot be detected for the top 30 mm of a
document.
For the shaded area in Fig. 1, you can also specify a length
not to detect multifeeds in the Software Operation Panel.
For details, refer to
"9.6 Settings Related to Multifeed
Detection" (page
180).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
46