Scanning Documents Of Different Types And Sizes; Scanning Both Sides At Once - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 5 Various Ways to Scan

5.2 Scanning Documents of Different Types and Sizes

Scanning Both Sides at Once

1
Load the document in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page
2
Start up ScandAll PRO and select the [Scan] menu
[Scanner Setting].
The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
3
Select [ADF (Duplex)] for [Scan Type].
4
Configure other settings such as [Paper Size].
5
Click the [OK] button.
The changes are applied.
37).
6
Scan the document by selecting the [Scan] menu
[Scan] in ScandAll PRO.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
68