Scanning A Book (Fi-6230Z/Fi-6240Z) - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 5 Various Ways to Scan

Scanning a Book (fi-6230Z/fi-6240Z)

1
Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
2
Remove the document cover by pulling it out in the
direction of the arrow.
3
Load the document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
Reference point
4
Start up ScandAll PRO and select the [Scan] menu
[Scanner Setting].
The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
78