Fujitsu 6240 - fi - Document Scanner Operator's Manual page 98

Chapter 5 Various Ways to Scan
4
Select [Multi Image Output] for [Output mode].
5
In [Order (for Multi Image Output)], select the order in
which the images are output.
Order
Primary : Color/Grayscale
Secondary : Binary
Primary : Binary
Secondary : Color/Grayscale
6
Select a side in [Select Current Image Setting].
Configure the scan settings for [Primary] and then [Secondary] in the
[TWAIN Driver (32)] dialog box.
7
Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
The settings are saved.
8
Scan the document by selecting the [Scan] menu
[Scan] in ScandAll PRO.
Description
A color/grayscale image is output
first, then a black & white image.
A black & white image is output
first, then a color/grayscale image.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
98