Quality Of Scanned Text Or Lines Is Unsatisfactory - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 8 Troubleshooting

Quality of scanned text or lines is unsatisfactory.

ADF: Are the glass and rollers inside the ADF clean?
Flatbed (fi-6230Z/fi-6240Z): Is the document pad clean?
Yes
Is the resolution appropriate?
Yes
Is [Binary (black and white)] mode selected?
Yes
Is there any foreign matter (e.g. dust, paper dust) on the
document?
No
*1: When scanning in halftone, grayscale or color, the scanned image may
not become sharp and clear. If it can be configured in the scanner
driver's setup dialog box, set the image mode to [Binary (black and
white)].
Perform cleaning.
For details, refer to "Chapter 6 Daily Care" (page
No
Specify a higher resolution in the scanner driver.
No
Select [Binary (black and white)] in the scanner driver. (*1)
No
Remove the foreign matter off the document.
It may be carried onto the glass inside the ADF or the document bed of the flatbed
Yes
(fi-6230Z/fi-6240Z), and cause the image to become dirty.
If the problem persists, check the items in
Service Provider" (page 149)
an authorized FUJITSU scanner service provider.
108).
"8.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
135