Fujitsu 6240 - fi - Document Scanner Operator's Manual page 114

Chapter 6 Daily Care
3 When you press the [Send to] and [Scan/Stop] buttons at the
same time, the feed/eject rollers rotate a certain amount.
Check
Function
Send to
[Send to] button
Scan
/Stop
[Scan/Stop] button
Power
Be careful not to touch the rollers with
your hand while they are rotating.
4 Put a piece of cloth moistened with Cleaner F1 or a sheet of
Cleaning Wipe against the roller surface, and wipe horizontally.
Wipe the whole surface by pressing the [Send to] and [Scan/Stop]
buttons at the same time to rotate the rollers.
Make sure that it is cleaned properly because residue on the roller
will affect the feeding performance.
As a guideline, pressing the [Send to] and [Scan/Stop] buttons
seven times will rotate the feed/eject rollers one revolution.
4
Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page
Confirm that the ADF is closed properly. Otherwise, the
document may not be fed into the ADF.
24).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
114