Fujitsu 6240 - fi - Document Scanner Operator's Manual page 100

Chapter 5 Various Ways to Scan
4
Select [Auto Color Detection] for [Output mode].
5
Select a side in [Select Current Image Setting].
You need to pre-configure the scan settings for each case when the
document is recognized as [Color/Grayscale] or [Binary].
Configure the scan settings in the [TWAIN Driver (32)] dialog box.
If it is recognized as a color/grayscale document, the
image is output in the mode selected for [Image Mode] in
the [TWAIN Driver (32)] dialog box.
6
Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
The settings are saved.
7
Scan the document by selecting the [Scan] menu
[Scan] in ScandAll PRO.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
100