Network Speed - Axis 27980R1 User Manual

Configuration Possibilities

Network Speed

160
With the Network Speed parameter you can manually specify the speed at
which you will send and receive network packages. You can change the
Network Speed setting to correspond to the type of network you are using
(10 or 100 Mbit).
To change the Network Speed in an Ethernet network, log in to the print
server's internal Web pages and click Admin | General Settings =>
Change. From here, you have the option of setting the network speed to:
Network Speed
AUTO_SENSE
10_HALF__DX
10_FULL_DX
100_HALF_DX
100_FULL_DX
The default Network Speed value is AUTO_SENSE, which is the correct
option for the majority of users.
If you choose a faulty Network Speed option for your network, you may
loose contact with the print server.
To reset the Network Speed parameter to AUTO_SENSE, you will have to
reboot the print server (disconnect and then re-connect the external
power supply).
Comment
This is the default value where the print server detects which speed is op-
timal for each network package you transfer.
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
AXIS 5570e User's Manual