Table of Contents
Advertisement
Configuration Possibilities
Changing Language in the Print Server's Web Interface
E-mail Notification
144
Auto-IP, a method which enables the host to automatically take a
linklocal IPv4 address. Auto-IP is supported by Windows 98, Me, 2000,
XP and Mac OS version 8.5 or higher.
See "Dynamic IP Address Assignment" on page 15.
English, French, German, Italian, Japanese and Spanish is supported in
the print server's Web interface, with English as the default language. You
can change the language used for the print server's Web interface from
the User mode:
1. Click the Change button next to Language.
2. Choose your preferred language and character set from the drop-down
lists, click OK and then press F5 to refresh the view.
You can change the Character Set by clicking the Change button. The
default Character Set is ISO-8859-1, which can be applied in most cases.
Japanese requires SHIFT_JIS.
Whenever an event that needs human intervention occurs in a network
printer, the concerned person can be notified by e-mail. This 'trouble-
report' contains a short and concise description of the event. Five events
are covered: Paper Jam, Out of Paper, Toner Low, No Toner, Printer
Off-line.
In order to determine who the e-mail recipients will be of these different
trouble-reports, follow these instructions:
1. From your print server's internal Web page, go to: Admin | Network
Settings | Detailed View | e-mail Notification. The following options will
appear:
Options
E-mail recipient
Administrator e-mail
This address will be used as "Reply to"-address in the e-mails
Address
PAPER JAM
The person responsible for handling paper jams in the printer
OUT OF PAPER
The person responsible for filling the printer with paper
TONER LOW
The person responsible for filling up the toner in the printer
NO TONER
The person responsible for changing the toner in the printer
PRINTER OFFLINE
The person responsible for the overall maintenance of printer
2. Enter the respective e-mail addresses of the trouble-report recipients in the
blank fields as follows:
name@company.com
3. Click OK and exit when done.
AXIS 5570e User's Manual
Advertisement
Table of Contents
