Network Speed; Netware Packet Signature Level 1,2,3 - Axis 5400+ User Manual

Configuration Possibilities

Network Speed

NetWare Packet Signature
Level 1,2,3
106
With the Network Speed parameter you can manually specify the speed at
which you will send and receive network packages. You can change the
Network Speed setting to correspond to the type of network you are using (10
or 100 Mbit).
To change the Network Speed in an Ethernet network, log in to the print
server's internal Web pages and click Admin | General Settings =>Change.
You have the options listed here:
Network Speed
AUTO_SENSE
10_HALF__DX
10_FULL_DX
100_HALF_DX
100_FULL_DX
The default Network Speed value is AUTO_SENSE, which is the correct option
for the majority of users.
If you choose a faulty Network Speed option for your network, you may loose
contact with the print server.
You can reset the Network Speed parameter to AUTO_SENSE, you will have to
reboot the print server (disconnect and then re-connect the external power
supply).
Protects servers and clients using the NetWare Core Protocol™ services. NCP
packet signature prevents packet forgery by requiring the server and the client
to sign each NCP packet.
Comment
This is the default value where the print server detects
which speed is optimal for each network package you
transfer.
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
AXIS 5400+ / AXIS 5600+ User's Manual