Typical Invocation From A Terminal Window - Axis 27980R1 User Manual

Adding Printers in UNIX/Linux

Typical Invocation from a Terminal Window

Note:
116
1. Select the Network printer radio button and click Next.
2. Enter the IP address or host name of the print server as well as the port you
want to use. Port numbers available for TCP/IP are:
Ports numbers USB port
AXIS 5570e 9902
Also see "TCP Ports Opened for Raw Printing" on page 247.
3. Click Next. Fill in data to help users identify the printer, i.e. name, description
and location. Click Next.
4. Select printer model and click Next.
5. Configure the printer and click Next.
6. The printer is set up. Click Finish and the printer is accessible.
Still using Mandrake as an example, open a Terminal Window and type
the command
printtool
version will start (as described above). If you do not have the X Window
System installed, the command will start a text based version. The same
information as was described above will be needed.
In Mandrake, even if you type
automatically start.
Parallel port 1 Parallel port 2
9900 —
. If you are in a terminal window, the graphic
at a shell prompt,
printtool
Serial port
—
will
printerdrake
AXIS 5570e User's Manual