Network Speed - Axis 5600+ User Manual

Section 10: Print Server Features
138

Network Speed

Introduced in Firmware Version 6.20
With the Network Speed parameter you can manually specify the
speed at which you will send and receive network packages. You can
change the Network Speed setting to correspond to the typ of network
you are using (10 or 100 mbit).
To change the Network Speed, log in to the print server's internal web
page and click Admin | General Settings | General. From here you
have the option of setting the network speed to:
AUTO_SENSE
(default
value)
10_HALF__DX
10_FULL-DX
100_HALF_DX
100_FULL-DX
The default Network Speed value is AUTO_SENSE. This option is
the correct option for the majority of users. If you choose a faulty
Network Speed option for your network, you may loose contact with
the print server. In order to reset the Network Speed parameter to
AUTO_SENSE, you will have to perform a factory default on the
print server.
AXIS 5600+ User's Manual
The print server detects which speed is opti-
mal for each network package you transfer.
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex