Table of Contents
Advertisement
Section 12
Configuration Possibilities
Autodetect Printer Type
Auto-IP
AXIS 5570e User's Manual
This section describes some special features offered by the AXIS 5570e:
Autodetect Printer Type, on page 143
Auto-IP, on page 143
Changing Language in the Print Server's Web Interface, on page 144
E-mail Notification, on page 144
Flash Loading of Firmware over the Web, on page 161
IPP (Internet Printing Protocol), on page 145
Logical Printers for Customized Printing, on page 153
Network Speed, on page 160
NetWare Packet Signature Levels, on page 161
Overriding Port Status, on page 167
TCP/IP Restrictions, on page 162
Enabling Secure Web Services — SSL/TLS, on page 163
Enabling IEEE 802.1X Port-based Authentication, on page 167
The print server can automatically detect the type of printer you are using
if you enable Autodetect Printer Type. The print server can then
recognize Epson and Hewlett Packard InkJet printers. Most Epson and
Hewlett Packard InkJet printers that have Mac OS printer drivers for
network printing are supported. If Autodetect Printer Type is disabled,
the AppleTalk printer type has to be specified manually in the print
server. For Epson InkJets it would be "EPSONLQ2" and for HP InkJets it
would be "DeskWriter". If the print server does not recognize the
connected printer the default setting, "LaserWriter" will be used as printer
type. "LaserWriter" is the recommended setting to be used with all
PostScript printers.
To enable Autodetect Printer Type, log in to your print server's Web
interface and select Admin | Network Settings | Detailed View |
Macintosh | Auto Detect Printer Type | Yes.
See the Help pages in the print server's Web interface for details.
In the absence of an IP address management mechanism such as DHCP,
the print server will receive a temporary IP address automatically over
Configuration Possibilities
143
Advertisement
Table of Contents
