Troubleshooting When Using The Copy Function; When A Message Is Displayed - Ricoh Aficio MP 1600L Operating Instructions Manual

2. Troubleshooting When
Using the Copy Function
This chapter describes likely causes of and possible solutions for copier function
problems.

When a Message Is Displayed

This section describes the machine's main messages. If other messages appear,
follow the instructions they contain.
Important
❒ For messages that are not listed here, see "When You Have Problems Operat-
ing the Machine".
Message
Cannot detect
original size
Cannot detect
original size
Cannot detect
original size
Cannot sort this
size.
Cannot select
Bypass Tray in
current set-
ting.
Original with
this length can-
not be duplex
scanned.
Check original
orientation.
Check paper
size.
Rotate Sort is
unavailable
with this paper
size.
Cause
Improper original is placed.
Improper original is placed.
Improper original is placed.
The specified paper size is not
available with the Sort function.
The specified function is not
available with the bypass tray.
The specified custom length is not
available for duplex printing
from the ARDF (eg. 2 Sided → 2
Sided, 2 Sided → 1 Sided, 2 Sided
→ Combine).
Original is not placed in a proper
orientation.
Improper paper size is set.
A size of paper for which Rotate
Sort is not available is selected.
Solution
Select paper manually, not with
the Auto Paper Select function,
and do not use the Auto Re-
duce/Enlarge function. See
"Originals", Copy Reference.
Input the both horizontal and
vertical sizes of the non-standard
original.
Place the original on the exposure
glass. See "Originals", Copy Reference.
This message appears when the by-
pass tray is selected. Use copy pa-
per that is not longer than 433 mm.
Select a paper tray other than the
bypass tray.
Do not place originals that are
longer than 433 mm.
Change the orientation of the
original.
If you press the {Start} key, copy
will start onto the selected paper.
Select the proper paper size. See
"Sort", Copy Reference.
11