Set Clock; Set Temperature; Firelight; Flame Speed - Dimplex MULTIFIRE DF3215 Practical User's Manual

Firelight

Occupancy Sensor
Temperature Setting

SET CLOCK

1. Press the ENTER button, the middle display
2. Use the direction buttons on the hand held remote to move the cursor to the
and press the ENTER button.
3. A day of the week will flash.
4. Use the left or
5. Press the up direction button and the hour display will flash.
6. Use the left or
7. Press the up direction button and the minute display will flash.
8. Use the left or
9. Press ENTER to return to the main menu.

SET TEMPERATURE

1. Press the ENTER button, the middle display
2. Use the direction buttons on the hand held remote to move the cursor to
ENTER.
3. Use the left or
4. Press ENTER to return to the main menu.
FIRELIGHT
1. Press the Flame/Heat button
2. Press the ENTER button, the middle display
3. Use the direction buttons on the hand held remote to move the cursor to
ENTER.
4. Press the up direction button to turn the firelight ON, press the
button to turn the firelight OFF.
5. Press ENTER to return to the main menu.

FLAME SPEED

1. Press the Flame/Heat button
2. Press the ENTER button, the middle display
3. Use the direction buttons on the hand held remote to move the cursor to
ENTER.
4. Repeatedly press the
flame speed.
NOTE
The bar graph located on the top of the display screen indicates the speed range of the
flame.
5. Press ENTER to return to the main menu.
Heater Program Setting
right direction button to select the day of the week.
right direction button to select the hour.
right direction button to select the minute.
right direction button to select between °F and °C.
to turn the Flame/Heat ON.
to turn the Flame/Heat ON.
left or right direction buttons to decrease or increase the
Flame Speed
Slow Start/Fading
Embers
Purifire™
Child Lock
Light Dimmer/Ambient
Light Sensor
Set Clock
FIGURE 6
flashes.
flashes.
flashes.
down direction
flashes.
clock
and press
and press
and press
9