Fireplace Installation; Bi-Fold Door Installation - Dimplex MULTIFIRE DF3215 Practical User's Manual

FIREPLACE INSTALLATION

1. Install the Bi-fold doors to the fireplace.
IMPORTANT
Bi-fold doors MUST be installed to the firebox prior to installing firebox to mantel.

BI-FOLD DOOR INSTALLATION

1. Remove the bi-fold doors from packaging.
2. Remove the Philips head screw and the door spacer from the bottom edge of the bi-fold
door opposite of the door handle.
3. Insert the door spacer into the bottom panel ledge mounting hole.
4. Insert the top edge of the bi-fold door into the top door track on the fireplace.
5. Secure the bi-fold door to unit with supplied screw using a short handled screwdriver.
NOTE
If short handled screwdriver is not available tilt the unit back.
6. Repeat steps 2-5 for the other side.
Bi-fold Door
2. Install the fireplace assembly into the mantel. (refer to mantel assembly instructions)
IMPORTANT
If not using a Dimplex mantel, the fireplace must be installed in an enclosure with the
following MINIMUM internal/opening dimensions.
Door Spacer
Screw
Bottom Ledge
Mounting Hole
FIGURE 1
4