Personal Program Schedule; Temporary Manual Override; Programming Individual Day Setting - Dimplex MULTIFIRE DF3215 Practical User's Manual

PERSONAL PROGRAM SCHEDULE

Before programming the heater use the personal program schedule below to determine which
time and temperature settings meet your schedule.
Use a pencil to be able to revise your records each time you are required to change your
program settings.
Day Program 1 (P1)
Time
Mon.
Time
Tues.
Time
Wed.
Time
Thurs.
Time
Fri.
Time
Sat.
Time
Sun.

TEMPORARY MANUAL OVERRIDE

To temporarily change the current set temperature without affecting the current programs:
1. Press the Flame/Heat
2. Press the right or
3. To cancel the temporary manual override press the Flame/Heat
the programmed settings will be reactivated.

PROGRAMMING INDIVIDUAL DAY SETTING

The Individual Day setting allows the user to program the heater thermostat to operate at a
selectable time and temperature for each day of the week individually. (
1. Press the ENTER button, the middle display
2. Use the direction buttons on the hand held remote to move the cursor to
3. Press and hold ENTER for 4 – 5 seconds,
4. Press the right or
(
5. Press the up direction button and the hour display to flash.
6. Press the right or
7. Press the up direction button and the minute display will flash.
8. Press the right or
9. Press the up direction button and the set temperature display will flash.
10. Press the right or
11. Press the up direction button and the P1 indicator will change to P2 and the hour
display will flash.
12. Repeat steps 5 – 10 for the P2 setting.
13. Press the up direction button and the individual day programmed will flash.
14. Press the right direction button for each additional required program day.
15. Repeat steps 5 – 14 for the remaining individual days.
16. Press ENTER.
17. Press the up direction button to turn the programmable heater function ON and press
the down direction button to turn the programmable heater function OFF.
18. Press ENTER to return to the main menu.
NOTE
When programmable heater function is ON the red indicator light is illuminated on the
firebox and the
NOTE
Press the ENTER button at any time to exit and return to the main menu.
Program 2 (P2)
Temp Time
Temp Time
Temp Time
Temp Time
Temp Time
Temp Time
Temp Time
On/Off button, the
left direction button to select the set temperature.
left direction button to select the day of the week.
)
left direction button to select the hour.
left direction button to select the minute.
left direction button to select the temperature setting.
display will appear on the remote control.
Temp
Temp
Temp
Temp
Temp
Temp
Temp
display will disappear.
flashes.
display will flash.
On/Off button and
)
12