Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 Installation Manual page 64

If you are using an IP address to specify the location of the computer that the ZENworks
Handheld Management Access Point is installed on, the IP address should remain constant
(for example, it doesn't change because of DHCP).
If you are using a DNS or computer name, be sure your handheld devices can resolve the
name if the devices are being cradled and using a third-party synchronization package.
13b (Optional) Select the Enable HTTP Encapsulation option.
13c (Optional) Select the Enable SSL option, then select the Accept Next Root Certificate from
the Access Point (And Then Disable) option, if desired.
You can also configure the ZENworks Handheld Management Access Point settings
(HTTP, SSL, and ports) using the
zfhap
Download option using
order for this root certificate to be accepted, you must select the Accept Next Root
Certificate from Access Point (And Then Disable) option.
13d (Optional) If you want to change the default port that ZENworks Handheld Management
uses, deselect the Use Default Port option, then type the desired port number in the Port
text box.
If you change this port number, you must also change the port number at the computer
where the ZENworks Handheld Management Access Point is installed (the ZENworks
Handheld Management Server or the computer on which you installed the ZENworks
Handheld Management Access Point).
13e Click Next.
14 Review the information in the Start Copying Files page, then click Next.
The installation program copies the files to the destination location specified in
page 61.
15 After the files are copied, ensure that the Start Desktop Sync option is selected, then click
Finish.
64 Novell ZENworks 7 Handheld Management Installation Guide
directory, by default). If you select the Publish Root Certificate for Client
cfgip.exe
program (in the
cfgip.exe
, the root certificate is automatically downloaded. In
/program files/novell/
Step 9 on