5 On the Welcome page, click Next.
6 Review the destination location where the installation program will install the Windows CE IP
client (browse to a different location, if desired), then click Next.
7 On the Handheld Configuration page, do the following:
7a In the Access Point text box, type the computer name or IP address of the server or
computer to which your handheld devices will connect (where the ZENworks Handheld
Management Access Point is installed).
You can leave this text box empty if you want to configure this setting on the handheld
device.
46
Novell ZENworks 7 Handheld Management Installation Guide