Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 Installation Manual page 70

To create a silent install for the ZENworks Handheld Management Access Point or Desktop
Synchronization Integration Software:
1 Copy the proxy directory from the ZENworks Handheld Management CD to a local or network
drive.
If you downloaded the ZENworks Handheld Management software from the
Downloads page (http://download.novell.com)
the proxy directory on a local or network drive.
The proxy directory contains the
Management Access Point and Desktop Synchronization Integration Software.
2 To create a silent install for the ZENworks Handheld Management Access Point, from a
command prompt, enter
or
To create a silent install for the Desktop Synchronization Integration Software, from a
command prompt, enter
The
-r
platforms. The
the silent installation.
When you are installing the ZENworks Handheld Management Access Point or Desktop
Synchronization Integration Software, you should specify the exact settings you want the
installation program to use when installing on users' machines (for example, installation path,
Handheld Management Server name, communications settings, and so forth).
For Server communication settings,
values in the [DLG_TCP_SERVER_CONFIG] section:
[{07E428B8-63D6-48A6-8FD7-B8CD84F8E6E8}-DLG_TCP_SERVER_CONFIG-0]
TCP Port=2398
SSL Port=2402
Enable HTTP=0
Enable SSL=0
Accept Next Root Cert=0
You change the values of these entries, if required, but you must not delete any entries from the
file. During the silent installation, these settings overwrite the existing configuration settings.
You cannot choose to apply only few entries
The Proxy Task upgrade setup does not read these DLG_TCP_SERVER_CONFIG settings and
does not change any of the server communication settings.
NOTE: You must record the setup in the same environment where you are running the setup in
the silent mode. For example, if you want to run the silent install on a machine that does not
have the ZENworks Handheld Management software installed, then you must perform the
record operation on a such machine only.
3 Copy the
the proxy directory that you copied in
4 Copy the proxy directory to the network location from which it will be distributed.
70 Novell ZENworks 7 Handheld Management Installation Guide
SETUP.EXE -r /accesspoint
SETUP.EXE -r
command creates a
setup.iss
file contains information to answer the installation prompts during
setup.iss
file from the windows directory on the supported Windows platforms to
setup.iss
and extracted the file, you should already have
file to install both the ZENworks Handheld
setup.exe
.
.
file in the windows directory for supported Windows
contains the following five entries with default
setup.iss
Step 1.
Novell Product