Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 Installation Manual page 47

If you are using an IP address to specify the location of the ZENworks Handheld
Management Server or ZENworks Handheld Management Access Point computer, the IP
address should remain constant (for example, it doesn't change because of DHCP).
7b (Optional) Select the Enable HTTP Encapsulation option.
7c (Optional) Select the Enable SSL option, then select the Accept Next Root Certificate from
Access Point (And Then Disable) option, if desired.
You can also configure the ZENworks Handheld Management Access Point settings
(HTTP, SSL, and ports) using the
directory, by default). If you select the Publish Root Certificate for Client Download
option using
cfgip.exe
certificate to be accepted, you must select the Accept Next Root Certificate from Access
Point (And Then Disable) option.
7d (Optional) If you want to change the default port that ZENworks Handheld Management
uses, deselect the Use Default Port option, then type the desired port number in the Port
text box.
If you change the default port number, you must also change it at the computer where the
IP conduit is installed.
7e Click Next.
8 (Optional) Select the Create Shortcut to the Client Console on CE Device option, then click
Next.
9 Review the information on the Start Copying Files page, then click Next.
The installation program copies the files to the destination location specified in
page 46.
10 On the InstallShield Wizard Complete page, click Finish.
The wizard creates CAB files for the following types of devices and copies them to the
program files\novell\zenworks windows ce ipclient
program (in the /program files/novell/zfhap
cfgip.exe
, the root certificate is automatically downloaded. For this root
Step 6 on
directory, by default:
Installing ZENworks Handheld Management 47