Zenworks Handheld Management Access Point Requirements; Handheld Client Requirements - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 Installation Manual

30 MB of disk space at the time of installation
A minimum of 128 MB of RAM
The Novell Client
or retrieved files
For step-by-step installation information, see
Management Server," on page
2.1.3 ZENworks Handheld Management Access Point
Requirements
The machine with the ZENworks Handheld Management Access Point software should meet the
following requirements:
Windows 2000 server with Service Pack 4 or later installed, or Windows Server 2003
A Pentium or higher processor
30 MB of disk space at the time of installation
A minimum of 128 MB of RAM
For more information, see
Point on Additional Computers," on page

2.1.4 Handheld Client Requirements

ZENworks Handheld Management supports handheld devices running the following:
BlackBerry devices:
BlackBerry 850/857 devices using the DataTAC network
BlackBerry 950/957 devices using the Mobitex network
BlackBerry 6000, 7000, and 8000 series devices
Palm OS version 3.5 or later
Windows CE version 2.11 or later, including Pocket PCs
Windows CE.Net 4.2 devices such as Symbol PPT 8800 and Denso BHT-200
Windows Mobile 5
Windows Mobile 6
The handheld client is the ZENworks Handheld Management component that is installed on each
managed handheld device in your system. The handheld client installs applications, collects
software and hardware inventory for each device, and enforces policies.
ZENworks Handheld Management provides the following types of handheld clients:
"Windows CE IP Client" on page 19
"Palm OS IP Client" on page 19
"Palm HotSync Client" on page 19
"RIM BlackBerry Client" on page 19
18 Novell ZENworks 7 Handheld Management Installation Guide
if you want to access Novell NetWare
TM
Section 2.3.1, "Installing the ZENworks Handheld
25.
Section 2.3.2, "Installing the ZENworks Handheld Management Access
35.
®
volumes to store application data