Table of Contents
Advertisement
Listen Ports and Addresses
In HTTP Service, select whether Apache should be running (Enabled) or stopped
(Disabled). In Listen on Ports, Add, Edit, or Delete addresses and ports on which the
server should be available. The default is to listen on all interfaces on port 80. You
should always check Open Firewall on Selected Ports, because otherwise the Web
server is not reachable from the outside. Keeping the port closed is only useful in test
situations where no external access to the Web server is necessary.
With Log Files, watch either the access log or the error log. This is useful if you want
to test your configuration. The log file opens in a separate window from which you can
also restart or reload the Web server (see
Section 41.3, "Starting and Stopping Apache"
(page 767) for details). These commands are effective immediately.
Figure 41.3 HTTP Server Configuration: Listen Ports and Addresses
Server Modules
You can change the status (enabled or disabled) of Apache2 modules by clicking Toggle
Status. Click Add Module to add a new module that is already installed but not yet
listed. Learn more about modules in
Section 41.4, "Installing, Activating, and Config-
uring Modules"
(page 769).
766
Installation and Administration
Advertisement
Table of Contents
Troubleshooting
