Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 160

Rescue Floppy
This disk contains a special environment that allows you to perform maintenance
tasks in your installed system, such as checking and repairing the file system and
updating the boot loader. To start the rescue system, boot with the standard boot
disks then select Manual Installation → Start Installation or System → Rescue
System. Insert the rescue disk when prompted.
Custom Floppy
Use this to write any existing floppy disk image from the hard disk to a floppy disk.
Download Floppy Image
With this, enter a URL and authentication data to download a floppy disk image
from the Internet.
To create one of these floppy disks, select the corresponding option and click Next.
Insert a floppy disk when prompted. Click Next again to create the floppy disk.
7.5.4 Boot Loader Configuration
To configure booting for systems installed on your computer, use the System → Boot
Loader module. A detailed description of how to configure the boot loader with YaST
is available in
7.5.5 Clustering
Information about Heartbeat and high availability configuration with YaST are provided
in Chapter 13, Installing a Heartbeat 2 Cluster Using YaST
High Availability under Linux
7.5.6 LVM
The logical volume manager (LVM) is a tool for custom partitioning of hard disks with
logical drives. Find information about LVM in
(page 123).
160 Installation and Administration
Section 21.3, "Configuring the Boot Loader with YaST"
(page 269).
(page 279) and
Section 6.1, "LVM Configuration"
(page 411).
Chapter 12,