Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 248

9.2.5 Configuring Debug Logging
If owcimomd is run in debug mode, then the debug log is active with the following
settings:
• log.debug.categories = *
• log.debug.components = *
• log.debug.format = [%t] %m
• log.debug.level = *
• log.debug.type = stderr
Debug Log with Color
If you want a color version of the debug log, use the following ASCII escape codes:
log.debug.format =
\x1b[1;37;40m[\x1b[1;31;40m%-.6t\x1b[1;37;40m]\x1b[1;32;40m
%m\x1b[0;37;40m
If you want to use additional colors, use the following codes with the log.debug.format
command:
Table 9.3
Color
red
dark red
green
dark green
yellow
248 Installation and Administration
Additional Color Codes for the log.debug.format Command
Codes
\x1b[1;31;40m
\x1b[0;31;40m
\x1b[1;32;40m
\x1b[0;32;40m
\x1b[1;33;40m