7.10.9 Vendor Driver CD
Install device drivers from a Linux driver CD that contains drivers for SUSE Linux
Enterprise with Miscellaneous → Vendor Driver CD. When installing SUSE Linux
Enterprise from scratch, use this YaST module to load the required drivers from the
vendor CD after the installation.
7.11 YaST in Text Mode
When YaST is started in text mode, the YaST Control Center appears first. See
Fig-
ure 7.7, "Main Window of YaST in Text Mode"
(page 184). The main window consists
of three areas. The left frame, which is surrounded by a thick white border, features the
categories to which the various modules belong. The active category is indicated by a
colored background. The right frame, which is surrounded by a thin white border, pro-
vides an overview of the modules available in the active category. The bottom frame
contains the buttons for Help and Exit.
Figure 7.7 Main Window of YaST in Text Mode
When the YaST Control Center is started, the category Software is selected automati-
cally. Use
and
to change the category. To start a module from the selected category,
↓
↑
press
. The module selection now appears with a thick border. Use
and
to select
→
↓
↑
184
Installation and Administration