Deleting A Group; Auditing User Synchronization Activity; Customizing General Connector Configuration Settings - Novell DATA SYNCHRONIZER - ADMINISTRATION GUIDE 07-2010 Administration Manual

5 (Conditional) If you want to apply a user profile to the group of users, select the profile in the
Apply Profiles drop-down list.
For more information, see
6 Click Add to add the group to the connector.
The group is immediately added to the connector.
7 Add the group to additional connectors to meet the data synchronization needs of the user in the
group.

4.3.2 Deleting a Group

1 In Synchronizer Web
click Groups.
2 In the Manage Groups list, click
deletion.
3 Repeat the process for each connector where you want to delete the group.

4.4 Auditing User Synchronization Activity

As your Synchronizer system grows and evolves, you might add a large number of users and groups.
As time passes, some users might not need the same synchronization services as when you
originally set up your Synchronizer system.
You can check user activity in your Synchronizer system by performing a user audit. You can
perform the audit on a specific connector or on your Synchronizer system
1 In Synchronizer Web
system.
or
Click a specific connector, then click Audit Users to list all users that have been added to the
selected connector.
The resulting list provides the type (user or group), the distinguished name of each user or
group, and application username for users, and the date and time of the most recent activity for
each user.
2 To save the listed data for use in a spreadsheet:
2a Click Export CSV.
2b Select
Save File
2c Browse to and select the directory where you want to save the file.
2d (Optional) Change the filename as needed.
2e Click Save to save the audit report in CSV format for use in a spreadsheet program.
4.5 Customizing General Connector
Configuration Settings
Some connector configuration settings are the same for all connectors.
Section 4.5.1, "Controlling Connector Startup," on page 40
Section 4.1, "Managing User Profiles," on page
Admin, click the connector where you want to delete the group, then
for the group to delete, then click Yes to confirm the
Admin, click (Global Audit) to list all users in your Synchronizer
, then click .
OK
33.
Managing Connectors 39