Accessing Synchronizer Web Admin; As The Synchronizer Administrator - Novell DATA SYNCHRONIZER - ADMINISTRATION GUIDE 07-2010 Administration Manual

Accessing Synchronizer Web
2
Admin
All configuration of your Synchronizer system is done through Synchronizer Web Admin. When
you log in as the Synchronizer administrator, you can configure the Sync Engine and connectors.
When users log in using their network usernames and password, they can control connector-specific
aspects of data synchronization for each connector where they have been added.
Section 2.1, "As the Synchronizer Administrator," on page 13
Section 2.2, "As a Synchronizer User," on page 14
See also Section 3.1, "Configuring Synchronizer Web Admin," on page

2.1 As the Synchronizer Administrator

1 Access Synchronizer Web Admin at the following URL:
https://data_synchronizer_server:8120
Replace
data_synchronizer_server
Synchronizer server.
2 Specify the Synchronizer administrator username (such as
established during installation, then click Login.
Synchronizer system configuration and administration is performed using Synchronizer Web
Admin.
Section 3.1, "Configuring Synchronizer Web Admin," on page 15
Section 3.2, "Configuring the Sync Engine," on page 19
with the IP address or DNS hostname of the
admin

Accessing Synchronizer Web Admin

15.
) and password that were
2
13