Changing The Synchronizer Database Password - Novell DATA SYNCHRONIZER - ADMINISTRATION GUIDE 07-2010 Administration Manual

================
From Engine to Mobility Connector...
====================================
From Mobility Connector to Device...
====================================
Each section lists the message pertaining to the problem message for that segment of the
synchronization process, enabling Support to pinpoint the source of the synchronization problem.
3.5 Changing the Synchronizer Database
Password
To change the Synchronizer database password, you must change the password for
in three places:
PostgreSQL (command on the command line)
Sync Engine (setting in Synchronizer Web Admin)
Config Engine (setting in a configuration file)
1 Reset the password for the PostgreSQL database:
1a In a terminal window on the Synchronizer server, log in as the
1b Enter the following command:
psql --user datasync_user datasync
1c Enter the current password for the Synchronizer database.
1d Enter the following command at the
ALTER USER datasync_user WITH PASSWORD 'password';
Replace
1e Enter
2 Reconfigure the Sync Engine to use the new password:
2a In
2b In the Password field in the Database Settings box, specify the new Synchronizer
database password.
2c Click Save Database Settings.
3 Reconfigure the Config Engine to use the new password:
3a In the terminal window used for
/etc/datasync/configengine
3b Edit the
3c In the
between the
3d Save the
4 Restart the Synchronizer services:
30 Novell Data Synchronizer Administration Guide
with the new password for the Synchronizer database.
password
to quit.
/q
Synchronizer Web Admin, click the Sync Engine.
configengine.xml
section, replace the existing database password with the new password
<database>
tags.
<password>
configengine.xml
prompt:
datasync>
Step 1, change to the following directory:
file in a text editor.
file, then exit the text editor.
datasync_user
user.
root