Adjusting The Synchronizer Web Admin Timeout; Changing The Synchronizer Web Admin Port Number; Configuring Synchronizer Web Admin For A Specific Language - Novell DATA SYNCHRONIZER - ADMINISTRATION GUIDE 07-2010 Administration Manual

3.1.4 Adjusting the Synchronizer Web Admin Timeout

By default, Synchronizer Web Admin times out after one hour. You can adjust the session time by
editing the Synchronizer Web Admin configuration file.
1 In a terminal window on the Synchronizer server, log in as the
2 Change to the following directory:
/etc/datasync/webadmin
3 Open the
4 Add the following line between the
<sessionTimeout>seconds</sessionTimeout>
5 Replace
Admin times out.
The default is 3600 seconds (60 minutes). Increase or decrease the setting as needed to meet
your security needs.
6 Save the
7 Restart the Web Admin service to put the new setting into effect:
rcdatasync-webadmin restart

3.1.5 Changing the Synchronizer Web Admin Port Number

When you access Synchronizer Web Admin from your Web browser, the default port number is
8210. You can configure Synchronizer Web Admin to use a different port number, such as a port
number that is already open through your firewall to provide external access to Synchronizer Web
Admin.
1 In a terminal window on the Synchronizer server, log in as the
2 Change to the following directory:
/etc/datasync/webadmin
3 Open the
4 Change 8120 to the desired port number.
5 Save the
6 Restart the Web Admin service to put the new port number into effect:
rcdatasync-webadmin restart
3.1.6 Configuring Synchronizer Web Admin for a Specific
Language
The Synchronizer Web Admin interface has been translated into the following languages:
Dutch
French
German
18 Novell Data Synchronizer Administration Guide
file in a text editor.
server.xml
with the number of seconds you want to elapse before Synchronizer Web
seconds
file, then exit the text editor.
server.xml
file in a text editor.
server.xml
file, then exit the text editor.
server.xml
tags:
<config>
user.
root
user.
root