Mac Clone; Lan - TP-Link TL-MR3040 User Manual

TL-MR3040
The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses
one of these protocols, then you must configure your connection manually.
4.5.4

MAC Clone

Choose menu "Network→MAC Clone", you can configure the MAC address of the WAN on
the screen below.
Some ISPs re quire that you register the MAC Address of your adapter. Changes are rarely
needed here.
WAN MAC Address - This field displays the current MAC address of the WAN port. If
your ISP requires you to register the MAC address, please enter the correct
into this field in XX-XX-XX-XX-XX-XX format(X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the PC that is
managing the Router. If the MAC address is required, you can click the Clone
Address To button and this MAC address will fill in the WAN MAC Address field.
Click R estore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Save button to save your settings.
Click the
Note:
ur LAN can use the MAC Address Clone function.
Only the PC on yo
4.5.5

LAN

Choose me nu "Network→LAN", you can configure the IP parameters of the LAN on the screen
as below.
Portable 3G/3.75G Battery Powered Wireless N Router
Figure 4-19 MAC Address Clone
-43-
MAC address
MAC