Quick Setup; Operation Mode; Network; Wan - TP-Link TL-MR3040 User Manual

TL-MR3040

5.3 Quick Setup

Please refer to Chapter 3: "Quick Installation Guide."

5.4 Operation Mode

On this page, you can choose the operation mode of the Router. Here take the WISP Mode as
example. If you want to use other modes, select them as Figure 5-2 shown.

5.5 Network

Figure 5-3 the Network menu
There are three submenus under the Network menu (shown in Figure 5-3): WAN, MAC Clone
and LAN. Click any of them, and you will be able to configure the corresponding function.
5.5.1

WAN

Choose menu "Network→WAN", and then you can configure the IP parameters of the WAN on
the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follows (Figure
5-4):
Portable 3G/3.75G Battery Powered Wireless N Router
Figure 5-2 Operation Mode
-104-