Wireless Security - TP-Link TL-MR3040 User Manual

TL-MR3040
Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.
6.6.2

Wireless Security

Selecting Wireless > Wireless Security will enable you to configure wireless security for your
wireless network to protect your data from intruders. The AP provides three security types: WEP,
WPA/WPA2 and WPA-PSK/WPA2-PSK. Wireless security can be set on the following screen
shown as Figure 6-10. The security options are different for different operation mode.
1) Access Point
Operation Mode - Shows the current operation mode.
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this device without encryption. It is strongly
recommended that you choose one of the security types to enable security.
WPA/WPA2 – Personal (Recommended) - Select WPA based on pre-shared key.
Portable 3G/3.75G Battery Powered Wireless N Router
Figure 6-10 Wireless Security - Access Point
-190-