Mac Clone - TP-Link TL-WR810N User Manual

Chapter 4
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the Internet continually in the background.
4. 4. 2.

MAC Clone

1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Network >
3. Configure the WAN MAC address and click Save.
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
the router. If the MAC address is required, you can click
MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect until the
connection is re-established.
4. 4. 3. LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
MAC Clone.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is managing
WAN MAC Address
Configure the Router in Standard Wireless Router Mode
Max Idle Time
to restore the MAC address of WAN
Clone MAC Address
field.
because some
and this
27