TP-Link TL-MR3040 User Manual page 136

TL-MR3040
To filter wireless users by MAC Address, click Enable. The default setting is Disable.
MAC Address - The wireless station's MAC address that you want to filter.
Status - The status of this entry either Enabled or Disabled.
Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or
Modify Wireless MAC Address Filtering entry" page will appear as shown in Figure 5-23:
Figure 5-23 Add or Modify Wireless MAC Address Filtering entry
To add a MAC Address Filtering entry, follow these instructions:
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
1.
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-00-07-8A.
Enter a simple description of the wireless station in the Description field. For example:
2.
Wireless station A.
Status - Select Enabled or Disabled for this entry on the Status drop-down list.
3.
Portable 3G/3.75G Battery Powered Wireless N Router
Figure 5-22 Wireless MAC address Filtering
-126-