Mac Clone - TP-Link TL-WR844N User Manual

Chapter 4
• VPN Server IP/ Domain Name
provided by your ISP.
• MTU Size - The default MTU size is "1420" bytes, which is usually fine. It is not
recommended that you change the default MTU Size unless required by your ISP.
• Connection Mode
• Auto - In this mode, the internet connection reconnects automatically any it
gets disconnected.
• On Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again.
• Manual - In this mode, the internet connection is controlled manually by clicking
the Connect/Disconnect
function as On Demand
connection can be inactive before it is terminated into the Max Idle Time. The
default value is 15 minutes. If you want the internet connection remains active
all the time, enter 0 (zero).
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
4 2 3

MAC Clone

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
3. Configure the WAN MAC address and click SAVE.
• Use Default MAC Address
router in case the ISP does not bind the assigned IP address to the MAC
address.
• Use Current MAC Address
computer that is connected to the router, in case the ISP binds the assigned IP
address to the MAC address.
- Enter the VPN server's IP address or domain name
- In this mode, the internet connection will be terminated
button. This mode also supports the
mode. Enter a maximum time (in minutes), the internet
Network > Internet and locate the
- Do not change the default MAC address of your
- Select to copy the current MAC address of the
Configure the Router in Wireless Router Mode
Max Idle Time
MAC Clone section.
Max Idle Time
because some
25