Mac Clone - TP-Link TL-WR902AC User Manual

Chapter 4
• MAC Address - The physical address of the LAN ports. The value can not be changed.
• IP Address - Enter the IP address in dotted-decimal notation of your router (factory
default - 192.168.0.254).
• Subnet Mask - An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
• IGMP Snooping - The IGMP Snooping feature allows the router to only forward
multicast traffic to ports that have requested them.
Note:
• If you have changed the IP address, you must use the new IP address to log in.
• If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP
Server will be configured automatically, but the Virtual Server and DMZ Host will not take effect until they
are re-configured.
4. 2. 4.

MAC Clone

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Network > MAC
3. Configure the WAN MAC address and click Save.
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
managing the router. If the MAC address is required, you can click
and this MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect
until the connection is re-established.
Clone.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is
Configure the Router in Wireless Router Mode
to restore the MAC address of WAN
WAN MAC Address field.
Clone MAC Address
30