TP-Link TL-MR3040 User Manual page 28

TL-MR3040
filed. If your country or region is not listed, please contact your local government
agency for assistance.
Channel - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference
problems with another nearby access point. If you select auto, then the AP will
select the best channel automatically.
Security Mode – Please refer to the Appendix C: Security Mode.
If you choose Repeater, the next screen will appear as shown in Figure 3-18. In
Repeater mode, the AP with WDS disabled will relays data to an associated root AP. AP
function is enabled meanwhile. The wireless repeater relays signal between its stations
and the root AP for greater wireless range. Please input the MAC address of root AP in
the field "MAC Address".
Figure 3-18 Quick Setup – Repeater
Name of remote AP (SSID) - Enter the name of a remote AP (also called the
SSID) that you want to access. Click the Survey button behind it, you can choose
one of searching results to fill in this field.
MAC Address - Enter the MAC address of AP that you want to access. When you
use the survey function to fulfill the Name of remote AP (SSID), this field will be
filled in automatically.
Region - This field determines which operating frequency will be used. To
achieve more information, you can read the same glossary in Access Point part.
Portable 3G/3.75G Battery Powered Wireless N Router
-18-